– Get the best base reaction yield (98-99%) with our high temperature protocol, which
saves catalizer, methanol and reaction time (reducing the main cost)
– In one single step, it will process any oil or liquid yellow grease with up to 6% FFA
– Washing this biodiesel made from virgin oils is not mandatory. No polluting by-products!
– Liquid lye catalyzer may also be used (in this case, use our sawdust dry washing).
The smallest & lightweight M4 module makes and gravity settles 2 x 200L (2x50gal) of biodiesel per day. It is composed of the following:
1 (one) BD2-D, vacuum flash dryer for full dewatering 100-200 L/h of veggie oil
1 (one) BD2 pressurized processor, performing the 240 liter batch reaction
1 (one) SAT-1, oil less, air compressor for safety handling the liquids
Designed to be installed in full ventilated rooms, all the biodiesel processors are industrial grade, stainless steel made, with on-line mixer, double pump feeding, belt type electric heaters in pipes, and 3 safety devices.
The optional BD2F vessel is a 0.5 micron filter to keep out the sterol glucosides particles, and delivers the best bio diesel for low temperature use.
The resulting biodiesel can meet ASTM or EN standards (depends on the feedstock used).
Main Benefits:
> driven by one single non-skilled personnel.
> reduced energy consumption: 60 Wh/liter, including the oil dewatering
> liquid lye can be used as catalizer (sawdust dry “washing” must be used in this case)
> gravity settling means no maintenance needed: it exists two mobile parts only
Easy and fast biodiesel quality control by two physical parameters and 2 tests:
* Specific Gravity at 20°C < 0.895 g/cm3
* Kinematic Viscosity at 40°C < 5.5 cSt
* PH > 7 measure, and the “27/3” chemical test
Expandable from 400 to 6000 L/day (1500 gal/day):
Each module can make 15 reactions in 24h. Then, by sending the mixture to external settling tanks (BD2-E type) the vessel becomes free to handle successive reactions. This way, one M40 module may settles up to 6,000 liters/day(1500 gal/day) of high quality biodiesel.
** NOTE: the 8-9h gravity settling time into the pressurized decanters defines the daily production. Each batch reaction, from the oil drying up to the reaction end, takes 60-90 minutes only.
There are available bigger M8/16/24/32/40 modules with the new BD4 reactor with one 400 L/batch BD4 type processor, the M40 module offers a production of 6000 L of biodiesel in 24h (over 1800 T/year) by adding several BD4-E settling tanks.
Manpower Requirements: two operators.
Modular arrangement: several M40 units can be placed in parallel to increase the production. Any of them may simultaneously process a different feedstock each to make high quality biodiesel.
Our supply comes with BD JET Manual, detailing the technology and instructions for easy DIY installation.
To comply with quality control, the scope includes instruments for Specific Gravity & Viscosity measurements.
As an option, we can include the new BD2-F device, for 0.5 micron centrifugal filtering, which will remove any sterol glucosyde particle from the biodiesel.
For Inquiry and Request for Micro Biodiesel Manufacturing Equipments, email gregoriojess@yahoo.com
Jess C. Gregorio
Affiliate Marketing and Project Lead Generation Manager for the Philippine Territory
gregoriojess@yahoo.com
JcgregSolutions 