THE BOILER HOUSE – A BASIC OVERVIEW OF A STEAM SYSTEM


The simplest boiler of all time.
The boiler is the heart of the steam system. The typical modern packaged boiler is powered by a burner which sends heat into the boiler tubes.

The hot gases from the burner pass backwards and forwards up to 3 times through a series of tubes to gain the maximum transfer of heat through the tube surfaces to the surrounding boiler water. Once the water reaches saturation temperature (the temperature at which it will boil at that pressure) bubbles of steam are produced, which rise to the water surface and burst. The steam is released into the space above, ready to enter the steam system. The stop or crown Valve isolates the boiler and its steam pressure from the process or plant.

Read more.

http://www.wermac.org/steam/steam_part2.html

********

Ad

Steam System Internal Corrosion

Why shutdown for descaling when you can protect your steam system while it is in operation?

There is nothing like increased productivity with no downtime to consider.

https://jcgregsolutions.wordpress.com/2015/03/19/preservation-of-boilers-and-turbines-with-the-surface-active-substance/

For Inquiries and Request for Quotation, email me at: gregoriojess@yahoo.com

Best Regards,

Jess C. Gregorio

Sales & Marketing

InSpecIT Inc.

Unit 719/722 City & Land Mega Plaza Bldg.

ADB Ave. cor. Garnet Road, Ortigas Center

San Antonio, Pasig City, Philippines 1605

gregoriojess@yahoo.com

For more news and information on steam system corrosion control and pm, check out techno blogsite below, subscribe for auto updates.

https://jcgregsolutions.wordpress.com/

Corrosion in Steam and Condensate Piping


Corrosion in pipes can advance into the interior parts of the metal over time, which may lead to pipe thinning and eventually pipe failure if left untreated. Furthermore, corrosion by-products are often carried downstream in piping, which can contaminate the fluid, cause the erosion and further corrosion of piping, and clog valve orifices.

Read more.

http://www.tlv.com/global/TI/steam-theory/corrosion.html

********

Steam System Internal Corrosion

Why shutdown for descaling when you can protect your steam system while it is in operation?

There is nothing like increased productivity with no downtime to consider.

https://jcgregsolutions.wordpress.com/2015/03/19/preservation-of-boilers-and-turbines-with-the-surface-active-substance/
For Inquiries and Request for Quotation, email me at: gregoriojess@yahoo.com
Best Regards,
Jess C. Gregorio

Sales & Marketing

InSpecIT Inc.

Unit 719/722 City & Land Mega Plaza Bldg.

ADB Ave. cor. Garnet Road, Ortigas Center

San Antonio, Pasig City, Philippines 1605

gregoriojess@yahoo.com
For more news and information on steam system corrosion control and pm, check out techno blogsite, subscribe for auto updates.

https://jcgregsolutions.wordpress.com/

Complete Steam Loop Erosion and Corrosion Management (boiler, turbine, distribution, process heaters, and condensate return lines)


1

REICON Wärmetechnik und Wasserchemie Leipzig GmbH (Heating Technology and Water Chemical Processing) is a medium-sized enterprise based in Leipzig, Germany.

The company originated from a department of the Institute of Energetic in Leipzig, which carried out extensive research work in the field of heating technology and water chemical processing in co-operation with the former academy institutes.

Since the foundation of our company in 1992 we have been specializing in the service provision for products concerning the chemical treatment of water and steam conducting systems.

We are a certified specialist company according to §19 l of the Federal Water Act and with our monitored quality management according to DIN ISO 9001:2008.  We offer a professional and high-quality service for:

–       Nuclear and conventional power plants
–       Combined heat and power stations and industrial power stations
–       Heat transmission networks
–       Cooling circuits
–       Special industrial applications (e.g. corrosion protection of autoclaves in the construction materials industry)

With our in house developed and produced water treatment chemical ODACON® and the corresponding procedures we offer a useful and effective way to:

–       clean boiler facilities, steam pipes and heat exchangers
–       preserve boiler facilities, entire circuits and single components
–       treat water- and steam circulations during operation
–       preserve and treat cooling circuits of combined heat and power units

ODACON® is a surface active substance and volatile in steam. It adsorbs on the metal surfaces and forms a monomolecular, hydrophobic protective layer. The latter is resistant to the usual substances present in water- and steam circuits. The main benefits of ODACON® implementation are:

–       Protection of the entire water- and steam system
–       Reduction of standstill corrosion during shutdown periods
–       Reduction of erosion, erosion corrosion, general corrosion during operation
–       Desorption of ionic impurities like chloride from surface deposits
–       Enhancement of heat transfer efficiency by modification of the surface characteristics

Due to low concentration levels in the applications the products are environmentally friendly and suffice to the modern ecological and economical demands.  For an application during operation the consumption is about 2 – 4 ml per ton of generated steam. For special treatments like preservation, the consumption is about 40 – 60 ml per ton of generated steam.  ODACON is an additional treatment program. The normal water treatment chemicals are still needed for pH stabilization.

Our team, many of which took part in the development of ODACON® and all related technologies, represent over 30 years of professional experience in the field of power station chemical engineering.

These long term experience and the constant further development of our product and service spectrum is the base for our success. This involves the development of specified products for the conservation of engines and cooling circuits as well as the design of cleaning technologies and custom-made applications for a large variety of different industrial firms.

With our comprehensive product and service spectrum we are successfully present in Germany as well as in other European countries like Austria, Switzerland, France and Italy for example. But the ODACON® products are also employed on the international market, e.g. in Estonia, Latvia, China and the Middle East countries.

 

For inquiries and request for quotation (RFQ), email  gregoriojess@yahoo.com

 

 

Jess C.Gregorio

Marketing & Sales

InSpecIT  Inc.

Unit 719/722, City & Land Mega Plaza Bldg.

ADB Ave.cor. Garnet Road, Ortigas Center

San Antonio,Pasig City, Philippines 1605

gregoriojess@yahoo.com

http://www.jcgregsolutions.wordpress.com

 

 

 

Full Service for Water and Steam Cycles as You Sleep


1

1

1

1

1

1

1

1
1

 

 

For inquiries and request for quotation (RFQ), email  gregoriojess@yahoo.com

 

 

Jess C.Gregorio

Marketing & Sales

InSpecIT  Inc.

Unit 719/722, City & Land Mega Plaza Bldg.

ADB Ave.cor. Garnet Road, Ortigas Center

San Antonio,Pasig City, Philippines 1605

gregoriojess@yahoo.com

www.jcgregsolutions.wordpress.com

Preventing Steam Turbine Corrosion and Erosion


1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1
1

 

For inquiry and request for quotation (RFQ),   email  gregoriojess@yahoo.com

 

Jess C.Gregorio

Marketing & Sales

InSpecIT  Inc.

Unit 719/722, City & Land Mega Plaza Bldg.

ADB Ave.cor. Garnet Road, Ortigas Center

San Antonio,Pasig City, Philippines 1605

gregoriojess@yahoo.com

www.jcgregsolutions.wordpress.com

Preservation of boilers and turbines with the surface active substance


1

1

1

1

1

1

 

For inquiry and request for quotation, email  gregoriojess@yahoo.com

 

Jess C.Gregorio

Marketing & Sales

InSpecIT  Inc.

Unit 719/722, City & Land Mega Plaza Bldg.

ADB Ave.cor. Garnet Road, Ortigas Center

San Antonio,Pasig City, Philippines 1605

gregoriojess@yahoo.com

www.jcgregsolutions.wordpress.com