Hardware Components of a PLC System
Processor unit (CPU), Memory, Input/Output, Power supply unit, Programming device, and other devices.
Central Processing Unit (CPU)
CPU – Microprocessor based, may allow arithmetic operations, logic operators, block memory moves, computer interface, local area network, functions, etc.
CPU makes a great number of check-ups of the PLC controller itself so eventual errors would be discovered early.
The internal paths along which the digital signals flow within the PLC are called busses.
The system has four busses:
– The CPU uses the data bus for sending data between the different elements,
– The address bus to send the addresses of locations for accessing stored data,
– The control bus for signals relating to internal control actions,
– The system bus is used for communications between the I/O ports and the I/O unit.
System (ROM) to give permanent storage for the operating system and the fixed data used by the CPU.
RAM for data. This is where information is stored on the status of input and output devices and the values of timers and counters and other internal devices. EPROM for ROM’s that can be programmed and then the program made permanent.
Inputs monitor field devices, such as switches and sensors.
Outputs control other devices, such as motors, pumps, solenoid valves, and lights.
Most PLC controllers work either at 24 VDC or 220 VAC. Some PLC controllers have electrical supply as a separate module, while small and medium series already contain the supply module.
The programming device is used to enter the required program into the memory of the processor.
The program is developed in the programming device and then transferred to the memory unit of the PLC.
SCADA. FDAS. HMI. FMS. PLC. PAC. DCS. RTU. SMS.
We do design, programming, and system integration of local-to-remote-real-time data monitoring and control. Create the leverage to catch up with change brought about by the 4th Industrial Revolution and the entry of IoT (Internet of Things). Would like to assist you eliminate constraints of time and distance on the plant floor.
We have done high rise and commercial building BMS and FDAS. Commissioned industrial plant floor HMI and Automation systems. Serviced marine vessel instrumentation. Customized and programmed wind, solar, and biomass power plant SCADA- 12KW up to 50MW.
Looking forward to serve you.
Unit 719/722 City & Land Mega Plaza Bldg.
ADB Ave. cor. Garnet Road, Ortigas Center
San Antonio, Pasig City, Philippines 1605
We do SCADA, BMS, FDAS, FMS, HMI, and Control System Integration.
Browse JcGreg Flipboard Magazine
Follow JcGreg WordPress Blogs